If you are in the market for a new deaerator, there is nothing wrong with admitting that you want to get the very best item available. This is a very good attitude to have – and it is one that we agree with 100 percent. When you are using these types of machines in an industrial setting, you are not going to want to take any chances on something that is substandard. You may think that you will be okay with using those poor quality machines, but we do not agree. We believe that only the very best tray type deaerator is going to work for you.
But what is a deaerator and how does it work? The whole idea behind using a deaerator is that you are needing something that can remove oxygen and the other gases that are present in feedwater. When you have a steam-generating boiler, it is going to have that feedwater. And you are going to want to get the oxygen and other gases away from this feedwater. Why? Because when there is too much oxygen, you are just going to end up with rust and other corrosion damage. This is not what we want at all!
The thing about deaerators is that you have two main options. You can either go with tray-type or you can choose the spray-type deaerator. The difference is that with the tray-type, you have a vertical domed section that is mounted on top of a horizontal vessel. And with the spray-type deaerator, you have a cylindrical vessel that is going to serve as the deaeration section and the storage tank too. It is just about what you will find the most effective. Do your research on the two main types of deaerators and make sure you pick the one that will be most useful for you!